Suitable for all drilling and milling machines, this accessory is mounted on a very precise guiding rail.
If the lathe is equipped with a divider disc, the circumference of a workpiece can be very precisely divided into equal parts.
The device can be used on lathes with a centre height from 200 mm. In principle, the centre point of the drill or router should be positioned exactly at centre height.
Traverse path 190 mm, depth stop on both sides, maintenance-free adjustable special guide, shaft diameter 25.4 mm with milled-in anti-twist protection, height adjustment via adjusting ring, Euro-mount 43 mm, top slide rotatable for milling work, (height from top of hand rest to centre 68 mm, + adjusting ring 11 mm), finely adjustable by means of 3 screws size 1.5
Properties
- 90190Z
- Hager
- 2022020016029
