EASY TO HANDLE, CUTTING HEADS DO NOT NEED TO BE ADJUSTED
Unlike other tools, the Pro-Forme tools do not require the cutting heads to be adjusted. The cutting heads are made of hardened M2 high-speed steel that is open on one side to avoid clogging, which is often the case with other boring tools. With the Pro-Forme tools, you can turn out at lower speeds (e.g. 500 rpm) and thus minimise chip formation to the bare minimum.
EASY TO SHARPEN
Simply use a diamond file for sharpening. For a long tool life, the cutting head can be replaced if necessary.
Properties
- WOOD-PHDC
- Woodcut
- 2022020011550
