This worktop oil is completely vegan and suitable for all wooden worktops and utensils.

The main ingredients of this Worktop Oil:

• Dehydrated Castor Oil
• Tung oil
• Refined Linseed oil
• Colophony
• Refined Sunflower oil
• This product contains no drying agents, preservatives or solvents

This is how to apply the worktop oil:

• Apply a thin layer of oil to the surface using a block whisk, a flat brush or a patent brush.
• Treat knobs, cracks and the like carefully.
• Where the oil is easily absorbed apply one or more additional coats immediately (wet in wet).
• Depending on temperature, allow to penetrate for about 30 minutes. Shorter in warm weather, longer in cooler weather.
• After this time, but in any case before the oil starts to dry, wipe off the excess oil with clean, dry cloths so that no oil remains on the surface. If the excess oil is removed too late or not thoroughly enough, this can result in a slow-drying layer that will wrinkle and stick.
• If necessary, apply subsequent layers of Worktop Oil at least 24 hours apart. If desired, sand lightly between coats to remove any fibres that have risen.

Tips:

• Remove excess oil promptly and thoroughly to avoid problems. See the details page for worktop oil how to do that.
• Don't use all the oil at once? Then order Stoploss bags to keep the oil in good condition.