Titebond - Quick & Thick Wood Glue - 237 ml
FM656
Titebond Quick & Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials. Titebond Quick & Thick Multi-Surface Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, dries clear and is unaffected by finishes.
- Application Temperature: Above 10°C
- Duration during which you can manipulate and assemble the glued parts before the adhesive fully cures or sets: 3-5 minutes (21°C @ 50% relative humidity)
- Total assembly time: 10-15 minutes (21°C @ 50% relative humidity)
- Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
- Method of application: From the plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess glue.
- Limitations: Titebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 10°C. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
- Type: Thixotropic polyvinyl acetate
- Calculated volatile organic compounds: < 3 g/L
- State: High-viscosity liquid
- Color: White
- Dried film: Clear
- Flashpoint: > 93.3°C
- Solids: 60%
- Viscosity: 36500 cps
- PH: 4.8
- Optimal temperature: To assure a good bond, 10°C is the lowest recommended temperature of the glue, air and materials during application.
- Storage life: 24 months in tightly closed containers around 23.8°C
Properties
- FM656
- Titebond
- 037083024036
Links & downloads
Related products
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock