Titebond - III Ultimate Wood Glue - 118 ml
FM645
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.
- Application Temperature: Above 8.3°C
- Duration during which you can manipulate and assemble the glued parts before the adhesive fully cures or sets: 8-10 minutes (21°C @ 50% relative humidity)
- Total assembly time: 20-25 minutes (21°C @ 50% relative humidity)
- Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
- Method of application: From the plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess glue.
- Limitations: Titebond III Ultimate Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 7.2°C. Store product below 23.8°C. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
- Type: Advanced proprietary polymer
- Calculated volatile organic compounds: < 0.1 g/L
- State: Liquid
- Color: Beige
- Dried film: Light brown
- Flashpoint: 93.3°C
- Solids: 52%
- Viscosity: 4200 cps
- PH: 2.5
- Optimal temperature: To assure a good bond, 7.2°C is the lowest recommended temperature of the glue, air and materials during application.
- Storage life: 24 months in tightly closed containers below 23.8°C
Properties
- FM645
- Titebond
- 037083014129
Related products
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Not in stock