Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.

• Application Temperature: Above 10°C
• Duration during which you can manipulate and assemble the glued parts before the adhesive fully cures or sets: 4-6 minutes (21°C @ 50% relative humidity)
• Total assembly time: 10-15 minutes (21°C @ 50% relative humidity)
• Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method of application: From the plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess glue.
• Limitations: Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 10°C. Agitation should restore product to original form. Read instructions before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
• Type: Aliphatic resin emulsion
• Calculated volatile organic compounds: < 0.2 g/L
• State: Liquid
• Color: Yellow
• Dried film: Translucent
• Flashpoint: 93.3°C
• Solids: 46%
• Viscosity: 3200 cps
• PH: 4.0
• Optimal temperature: To assure a good bond, 10°C is the lowest recommended temperature of the glue, air and materials during application.
• Storage life: 24 months in tightly closed containers at 23.8°C