End of life

89,84 €/pcs 21% VAT included
  In stock
This item will be shipped on the next business day after completing the order

There are 8 variants of this article, view them here >

Beveled edge chisels are the most versatile and universally used of all workbench chisels and should be an integral part of every woodworker's toolbox. They can be used freehand to cut gently or with light hammer blows. Side chamfers reduce the risk of jamming the cut and give access to undercuts, such as dovetails. Not recommended for heavy-duty applications.

Traditional bolster and sleeve design. Each chisel has a primary bevel of 25 degrees and a secondary bevel of 30 degrees to easily cut harder woods.

For soft woods like pine, woodworkers can profile the primary bevel of 20 degrees and the secondary bevel of 25 degrees differently. Very hard woods such as oak may require a steeper profile (30 degrees for the primary bevel and 35 for the secondary bevel).

Properties

  • RS167/38
  • Robert Sorby
  • 5013035028364
  • 38 mm
  • 135 mm
  • 310 mm
  • Buxus
Download productfiche
 
Filter 8 of 8 visible.
Product code Width Stock Price Amount  
RS167/3 3 mm
  In stock
64,26 €/pcs
End of life
  
RS167/10 10 mm
  In stock
54,32 €/pcs
End of life
  
RS167/13 13 mm
  In stock
55,77 €/pcs
End of life
  
RS167/19 19 mm
  In stock
59,01 €/pcs
End of life
  
RS167/25 25 mm
  In stock
61,06 €/pcs
End of life
  
RS167/32 32 mm
  In stock
79,12 €/pcs
End of life
  
RS167/38 38 mm
  In stock
89,84 €/pcs
End of life
  
RS167/50 50 mm
  In stock
115,22 €/pcs
End of life