This high speed steel cutter is perfect for scraping or shear scraping inside forms. Ideally suited for that finishing cut on egg cups, goblets, bowls and round bottom boxes.
Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material.
Sharpens to: 0.2 - 0.4 microns
Hardness: 62 RC
Material: M2 HSS
Properties
- RSTM-TIP4
- Robert Sorby
- 5013035044203
