The WOODCUT Bowl-Saver comes from the turning country of New Zealand and is now world famous.

An ingenious tool that makes it possible to cut several small bowls from large bowl blanks. This saves material and money (especially with expensive woods). There are different spigot diameters for the hand rest bases.

Safe and easy to use for all woodturners

The only bowl cutter that integrates with both the hand rest base and the tailstock of the lathe. This makes it easy to use for woodturners of all levels, from beginner to advanced.

Saves time and money

With the Bowlsaver, you make multiple bowl blanks and don't need extra blades. It comes with two high-strength blades and carbide cutting edges that are used one after the other. These allow you to cut out shells with a diameter of approx. 75 - 305 mm and a depth of up to 127 mm from the "mother shell".

For woodturning lathes from 1 hp.

The Bowlsaver is suitable for lathes with a minimum turning diameter of approx. 305 mm and a power of 1 HP or more. It can therefore be used on a wide range of lathes. The hand rests of the lathes have different pivot diameters. Select the correct tenon in addition to your bowlsaver when ordering. Assemble and save wood!

Predictable and reproducible results

The Bowlsaver's carbide cutting edge will cut out up to 500 bowls before needing resharpening. The Bowlsaver can be used for wet and dry wood. It helps you to cut out perfect bowls every time you use it. Templates for determining the bowl depth are included. Order the Woodcut Laser Guide to determine the bowl depth even easier.

Instruction manual & videos

A detailed instruction manual is included with your Bowlsaver. Instructions on how to operate and set up your Bowlsaver as well as examples of its use can be found in the VIDEO tab.