A blend of oils (including Tung oil), resins and driers, formulated to produce an attractive and durable finish. The finish is gloss. For a satin finish, use Rustins Danish Oil.

For all interior & exterior bare wood, doors, joinery, garden and indoor furniture.

Brings out the natural beauty of wood and veneered surfaces. Gives a natural open-grained lustrous finish. Easy to maintain. Conforms to Safety of Toys Regulations BS EN 71-3:1995.

The wood must be clean, smooth, dry and free from wax, dust and contaminants. Some hardwoods such as Iroko and Teak are naturally oily woods and this should be removed by scrubbing with white spirit, then wipe away whilst still wet with clean rags. Existing paint and varnishes should be removed with Varnish Stripper. Bare wood may be dyed before coating with Rustin’s Wood Dye.

Apply liberally with a clean rag or brush and wipe off the surplus oil after a few minutes. On exterior wood, the first coat should be applied liberally with a brush and allowed to dry without
wiping. Nibs may be removed from the final coat by applying the oil with a scouring pad, rubbing in the direction of the grain, then wiping away the surplus with clean rags.

Coats: Bare wood requires 3 coats. Exterior wood will require extra coats.

Drying Time: 4-6 hours depending on temperature and humidity.

Re-coating Time: A minimum of 4-6 hours depending on temperature and humidity.

Application Temperature: Ideally 15-25°C, do not apply below 10°C or if rain is expected.

Coverage: About 14sq.m per litre, 1 coat, depending on the absorbency of the wood.

Hazards: Flammable. Avoid contact with eyes and skin. Use in a well ventilated area. Keep out of reach of children. Keep away from sources of ignition – no smoking. Keep container tightly closed. Important: Rags used for oiling should be laid out flat to dry; otherwise they may catch fire due to spontaneous combustion.