Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.

• Application Temperature: Above 10°C
• Duration during which you can manipulate and assemble the glued parts before the adhesive fully cures or sets: 15 minutes (21°C @ 50% relative humidity)
• Total assembly time: 15-20 minutes (21°C @ 50% relative humidity)
• Required pressure: 100-250 psi, depending on substrates
• Method of application: For most consistent coverage a glue comb is recommended.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess glue.
• Limitations: Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
• Type: Modified PVA emulsion
• Calculated volatile organic compounds: 2 g/L
• State: Liquid
• Color: Tan
• Dried film: Dark Brown
• Flashpoint: > 93.3°C
• Solids: 42%
• Viscosity: 4500 cps
• PH: 4.9
• Optimal temperature: To assure a good bond, 10°C is the lowest recommended temperature of the glue, air and materials during application.
• Storage life: 12 months in tightly closed containers at 21.1°C