Paint strippers generally contain nasty chemicals such as chlorides to dissolve modern coatings. A paint stripper is therefore usually a nasty product to work with. Bad for the environment and bad for your health. If oil is not processed correctly, a layer of oil can remain on the surface, creating a sticky layer that is difficult to remove. This is why customers occasionally ask us for a nature-friendly alternative to chemical strippers. That is why we have included this fully biodegradable stripper in our range.

This stripper has the following properties:

• Powerful
• Fast
• Water-based
• Nature-friendly
• Easy to use
• Sufficiently viscous to treat vertical surfaces as well
• Fully biodegradable
• Non corrosive
• Non-irritant
• Not flammable
• Solvent-free
• Free of chlorides
• PH-neutral

This stripper is suitable for removing:

• All natural oils
• Natural waxes and floor polishes
• White spirit-based paints
• Water-based paint
• Alkyd resin-based paints
• Oil colour
• Varnishes
• Stains

How to use this paint remover:

• Stir product well before use.
• Do not dilute.
• Protect surfaces which are not to be treated with masking film.
• Apply the paint remover liberally using a wide flat brush or roller.
• Leave for 30 minutes or as long as desired. When the coat has dried simply apply a new coat to restart the stripping process.
• Remove old finishing coats using a putty knife, scraper or paint scraper. Edges and edges can be cleaned using a coconut brush.
• Repeat treatment if necessary.
• After 1 hour, wash the surface with a clean, damp cloth. Residues do not affect new oil layers.
• Do not apply in very humid conditions, below 10 or above 30 degrees Celsius.
• Not suitable for removing lime paint.
• Consumption: Approximately 4 to 8 square metres per can, depending on material, surface, finish, porosity and working method.

Tips:

• Store this product cool, dry and frost-free.
• Wear protective gloves and safety glasses.
• In case of contact with eyes, immediately flush open eyes with lukewarm water and seek medical advice.
• Remove paint residues from tools before cleaning with warm water and a soapy solution of Linseed oil soap.
• Do not flush product down the drain.
• This product does not contain chlorides.

Caution:

Polyurethane-based paints and other 2-component paints cannot be removed as well, if at all, with this stripper.